Filling and sealing machine DPC1204A

Filling and sealing machine DPC1204A

filling sealing 9000

The difference between the new filling and sealing machine and the old filling and sealing machine:
(1).DGC1204A new machine in the overall structure than DGC1204 old machine more reasonable and beautiful.
(2). The new machine seal can machine head diameter than the original significantly expanded, so that the life of the sealing CAM extended.
Old machine head can only be installed with light bearings, short service life, the new machine is all imported heavy bearings, its normal service life increased by more than 5 times.
(3). The new machine seal tank shaft adopts the double-shaft structure of the head roller and two separate roller, so that the feed of the sealing wheel can be adjusted and controlled separately, without affecting the quality of the sealing because of the CAM machining error or wear.
(4). The new machine in the sealing when the rotation direction is counterclockwise, so that after the end of the sealing can out of the direction of its steering automatically from the sealing machine, can avoid the card and can body scratches.
(5) the new machine filling machine cylinder adopts the overall arc structure, no dead Angle to avoid residual liquid

Main technical parameters:

sealing heaad: 4
filling head: 12
Production capacity: 50-150 cans/min
Air source pressure: 0.6mpa
Applicable tank height: 65 ~ 210mm
Applicable tank size: 52 ~ Φ Φ 99 mm
Motor power: 7.5kw
Overall dimension: 2750X1650X2000MM
Weight: 4000 kg